Pilot and mass production defoaming machines
Pilot and mass production defoaming machines
The defoaming machine for pilot and mass production is a device used to remove bubbles from the casting slurry. The working principle is that the motor drives the agitator to rotate, stirring the slurry in the tank. At the same time, the air in the tank is extracted through a vacuum source to form negative pressure, thereby achieving the purpose of removing bubbles in the slurry and adjusting the viscosity of the slurry.
Basic specifications:
| model | maximum throughput | speed | vacuum degree | Warm water jacket | notes |
| TP-30 | 24L | 15-50rpm (under no load) | -Above 0.09MPa | not have | Vacuum source selection |
| TP-100(S*) | 80L | 15-50rpm (under no load) | -Above 0.09MPa | Optional | Optional vacuum source and customer provided warm water system |
| TP-250(S*) | 200L | 15-50rpm (under no load) | -Above 0.09MPa | Optional | Optional vacuum source and customer provided warm water system |
*Install warm water jacket
Explanation: In addition to the above specifications, various sizes of defoaming machines can be customized.
- Name
- Phone
- Corporate name
- Address
- Leaving Message*
Previous：
Experimental slicer